Extra - DTMF Relay settings

When programming, the relays from the door station work with the indoor stations.

There is the option to add the remote digits from the door station.

A. Monitor.

C. In the monitor can be added 4 Codes that later can be used in Key settings

B. Door phone. Define the DTMF tones that need to be used to open the door. When for security or because the project contains more than 10 public doors to open, select 2 or more digits.

Sample:

There are two doors in the building, one main entrance, and a backdoor, both with an Akuvox video intercom.

The main door needs to open with 2 digits (22) and the back door with (21).

First, the door phones need to be set:

1. Open the config page of the first door phone.
2. Open the Tab relay in the Intercom menu
3. Set the DTMF Mode to 2 digits
4. Enter the two digits (22)
5. Give the relay a name (this is not mandatory)
6. Click on submit to save

And the same for the back door.

Define the DTMF tones to use to open the door.

1. Open the config page of the monitor
2. Open the tab Relay in the Phone menu
3. Enter DTMF tone 22 for the main door and 21 for the back door
4. And Submit to save

Now scroll down to the Key Setting.

1. Enable the Key to use
2. Label the key, this will be visible on the monitor
3. Set the DTMF tone that was defined at the top, "the Remote Relay settings"

Again Submit to save

There are also settings to open the door within the Call-Preview, Homepage, and Monitor page to open the door.